

Old craftsmanship
meets modern design
Although the Lyngby vase has been around for more than 50 years, it is more in demand than ever before. The classic Lyngby vase that most people associate with Lyngby Porcelæn is no exception. The white cylindrical vase with its distinctive grooves is a symbol of modern functionalism in Danish porcelain history.

Quality needs time
The actual production starts at the moulds, which are made at the factory. The mould can be used approximately 50 times until the edges lose their sharpness. The new shape is made on a lathe and each groove is made by hand. As the vases shrink in the kiln on both first and second firings, the moulds are made 17% larger than the vases.


Most of the work processes are carried out by hand, and each work process has a designated specialist.

When the vases are ready, they are plastered and washed off with a sponge and water. Everything is inspected and quality-assured before being driven to the first firing. To prevent the vases from cracking, the vases have to wait 48 hours before they can be fired. The vase is put in the oven for 10 hours at a temperature of 930 degrees Then every vase is dusted and the base is given the characteristic green monogramme. It is now time for the vase to be glazed. The application of glaze requires good timing as it is a difficult process.
After the vase has been glazed, any glaze is washed off the base of the vase so that it won't stick during the second firing. Here, the vase is fired again for 12 hours at a temperature of 1,390 degrees – a degree of heat that connects the porcelain to the glaze. During the second burning, the vase shrinks as much as 13–14% and may become deformed and warped.

Everything takes place in the factory, and each process is just as important as the previous and the next.

Explore Rosendahl.com
StoriesDelivery within 2–6 business days
Free shipping on orders from € 85
Extended right of return until January 23, 2024
Free gift wrapping with purchases from € 80







